Minimag power system

Started by bfeist, July 26, 2012, 08:11:54 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

bfeist

Greg Cadez (Gregor77) generously handed down his Minimag trainer for my son to start learning on. I had to replace the broken inrunner with an outrunner I had sitting around. It's a 980Kv 28A max motor drawing 23A static on a 10x6. The 10x6 seems too big for the plane but I don't have a 9x6 or 8x6 sitting around. The motor is probably too powerful for the little airframe but it'll have to do.

Ben

Ededge2002

#1
I have that motor that was speced for the formosa race series sitting if your interested.  it would turn a lot smaller prop than the 10".  you can trade it for your Enigma or free.. your choice!
Yea 400W/lb should about do it.. But wouldn't a nice round 500 be better?

bfeist

Dave Edwards came to the rescue with an 8x6 prop (he lives down the street).
It's pulling 13.6A now which with an AUW of 1.79lbs it's delivering 85W / lb. Perfect!

Gregor77

You will love the plane!  It is lots of fun!

sihinch

I got my wings with that plane - it's great for co-ordinated turns. Like Greg says, lots of fun.

Good luck Mr. Feist Jnr!  :)