Holy sh... I thought this was going to be easy. This plane will be real work. It is built like a .60 size airplane with liteply formers, stringers and sheeted fuse. No instructions. Just two parts drawings.
I thought this customer was being nice to me giving me this kit. He was probably trying to punish me.
Followed the first 7 steps of a build project per Bruce's PT 19 thread:
Photo 1 Clean the workbench off and find the project
Photo 2 Found the project
Photo 3 Make sure it is the right project
Photo 4 and 5 Make sure all the parts are there and identify the kit's inspection certificate so you know who to blame when you can't find a part
Photo 6 Get prepared to lay out plans on work bench surface and to protect them from messy over-glue. I use waxed paper.
Photo 7 Determine what part of the plane to build first - I'm going to start with the fuselage. Review and consider plan instructions.
I may modify this kit significantly. Thinner sheeting, reduce the amount of sheeting, adding stringers. Adds a whole new dimension to Bruce's comment
"Review and consider plan instructions. (Unlike Frank, I will likely follow them.)"Stay tuned. Check my pulse periodically.

If you notice a change in me at Wednesday's meeting, sign me up for Anger Management courses.

Frank