• July 19, 2019, 01:45:09 am
• Welcome, Guest. Please login or register.
Did you miss your activation email?


TEMAC Forum Guests

Please take the time to Register for the forum, especially if you are a TEMAC club member.

This is one of the most active RC club forums in Ontario. Please participate in the discussion to help our great club to continue to grow.

Author Topic: 2018-03 TEMAC Tickler, Winter Fun & 3D!  (Read 1006 times)

0 Members and 1 Guest are viewing this topic.

Offline sihinch

  • TEMAC Past-President
  • Global Moderator
  • Ace
  • *****
  • Posts: 3547
  • Karma: +26/-3
  • Real Name: Simon Hinchcliffe
  • TEMAC #: 124
  • Started Flying RC: 1987
2018-03 TEMAC Tickler, Winter Fun & 3D!
« on: February 04, 2018, 01:34:43 pm »
We've had some ups and downs with the temperature recently, but some members decided to make the most of the +3C last weekend to do some Rogofield flying!  I'm not sure of the official count, but I think around 10 members flew last Sunday, at some point.  Myself included!  Several maidens were completed, sadly not all of them ended well.  :o  But I am certain everyone had fun.  :D

I've added a few more pictures from the January pilots meeting.  Every time I do a Tickler, I thoroughly enjoy seeing people's smiling faces; it's a great reminder of the fun we have spending time together.  This Wednesday we have the chance to do it again..... ;D

This Wednesday, from 7:30pm in the basement at Colonel Mustard's Pub at 6545 Hwy 7 in Markham, we will all have the chance to learn more about the 3D printing technology that is, in all honesty, revolutionizing our hobby in many ways.  I know that I have already found myself using the skills and capabilities of others to provide me with 3D components for my models.  Gil Elgez has kindly offered to give us all an introduction to what's involved.  As always, we will meet for the dinner in the bar beforehand, usually from around 5pm.

Hope to see many of you there.

Offline vicwhit

  • Pilot
  • ***
  • Posts: 80
  • Karma: +2/-0
  • Real Name: Vic Whitmore
  • TEMAC #: 198
Re: 2018-03 TEMAC Tickler, Winter Fun & 3D!
« Reply #1 on: February 10, 2018, 02:37:34 pm »
I'm sure everyone enjoyed the 3D printer session. I find the technology lots of fun and a real learning curve.  Before I left for Mexico, I made about a dozen whistles for handing out to people on the beach that could alert first responders to drowning victims. So you can see that the printers can be more than just fun. I can hardly wait to get back home from the sunny south to get back at it.

in Saskatoon you can watch a live YouTube video of a 3D printer at work building a 12 foot RV trailer. A World first at Create Cafe http://www.createcafe.ca/.
Do it while you can.