• March 31, 2020, 01:23:25 pm
• Welcome, Guest. Please login or register.
Did you miss your activation email?

!!

TEMAC Forum Guests

Please take the time to Register for the forum, especially if you are a TEMAC club member.

This is one of the most active RC club forums in Ontario. Please participate in the discussion to help our great club to continue to grow.

Author Topic: TEMAC BBQ  (Read 799 times)

0 Members and 1 Guest are viewing this topic.

Offline Canuke

  • Captain
  • ****
  • Posts: 142
  • Karma: +2/-0
  • Real Name: Jim Spence
TEMAC BBQ
« on: May 19, 2019, 08:16:57 am »
Are any of you and/or spouses going to the BBQ today? Sandra is thinking of going but only if other wives are coming.



Online bweaver

  • Ace
  • *****
  • Posts: 1475
  • Karma: +7/-1
  • Real Name: Bruce Weaver
  • TEMAC #: 169
  • Started Flying RC: 1979
Re: TEMAC BBQ
« Reply #1 on: May 19, 2019, 06:27:45 pm »
@Canuke , I saw your post about your prop cut.  I hope it mends quickly.  If you're slow to get back out to the field, you will know we're talking about you.  If you can't fly, at least you can bring the coffee.  I take mine black.

Regarding your original inquiry, it wasn't met with many positive responses.  (0) 

As a matter of fact, I asked to Katie if she would like to come out to lunch with me to a s****y outdoor catered event.  (She must of saw me putting planes etc in the car and put two an two together.) 

Her response was "No thank you,  I would rather stay home and clean the stove."   Flying must be a guy thing for the most part? 

Seriously though, it might be a good idea to have a ladies day...

PS The stove is sparkling.

Offline Athol

  • Pilot
  • ***
  • Posts: 55
  • Karma: +0/-0
  • Real Name: Athol Cohen
  • TEMAC #: 264
  • Started Flying RC: 1974
Re: TEMAC BBQ
« Reply #2 on: May 21, 2019, 09:54:47 am »
@bweaver @carnuke, and all,

I've asked Barb to come along but she was the "Johnny on the Spot" and said thanks, but no thanks!  And no, she didn't clean the stove!

Jim, get better soon - and if you need some help with the Throttle Cut setup let me know?
« Last Edit: May 21, 2019, 01:19:04 pm by Athol »