ESC Heat Shrink

Started by SeeFernando, August 16, 2019, 01:06:50 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

SeeFernando

Hey Ya'll,

Where you do you get the Giant Heat Shrink for your ESC's?  I've got a 70A ESC that needs like 2-3" diameter tubing.

Thanks!
-Chris

sihinch

I think I have some that I can bring you. I got it from a swap meet, but maybe try banggood.....

msatin

HobbyKing has 50mm and 100mm (1.9 & 3.9in)
I also found this website, seems to have a good selection:
www.cabletiesandmore.ca/


You never fail until you stop trying

bweaver

I would try Sayle to see if they have any, because I know they sell wire heat shrink tubing in many many many sizes.  Closest Sayle that I go to is on Woodbine Ave south of the 407 (1 or 2 lights) on the east side.

VadimKirillov

Amazon, for 10$ you can get any size you need for the rest of your life. Next day if you have Prime.

msatin

Why didn't I think of that?  8)
You never fail until you stop trying

Palkina

if Bruce did not have a typo, this electronic components store has https://secure.sayal.com/zinc/index.asp

bweaver

Quote from: Palkina on August 16, 2019, 09:33:24 PM
if Bruce did not have a typo, this electronic components store has https://secure.sayal.com/zinc/index.asp

While I don't have many strong points, spelling isn't one of them ether.  :D

SeeFernando

Thanks guys!

Now I just need to figure what size based on the shrink ratio.

I'll check out Sayal and Amazon!

Cheers
-Chris

bweaver

Have you considered just electrical tape?   :-\

SeeFernando

Eww... I hate when electrical tape gets all gummy after a while, especially when it gets warn...

::)
-Chris

bweaver

Quote from: SeeFernando on August 17, 2019, 09:58:47 AM
Eww... I hate when electrical tape gets all gummy after a while, especially when it gets warn...

::)

Well aren't we 'just picky'...   ::)  Realistically how often do you plan on man handling the ESC anyways?   The label is already gone.  My esc's usually just sit there neglected until they either have to be replaced or I am moving to another plane out of necessity.  ;D

SeeFernando

This is true, but I think my OCD won't agree...

Also I saved the labels and I'm going to get clear tubing... OCD... Again...
-Chris

sihinch

Quote from: bweaver on August 17, 2019, 09:17:56 AM
Have you considered just electrical tape?   :-\

What is this @bweaver Toronto Electric Model Amateurs Club?!!!  :'(