Wings done.  Electronics next.

Battery hatch is hinged.

More hard-points and rigging anchors on the wing.

starting to assemble the fuse.

F.

Big surfaces on this plane.

Looks like a Formosa biplane- a mid-air collision between two Formosa pylon racers.
Love the two-tone elements.

Frank

Yes, Guy.

Before I started building it I flipped one fuse side over.
Sounds like you speak from experience.... but so do I! 

This is not a kit.  It is a 3D puzzle.  Formers are marked on the plans and the formers have laser numbering (F1- F11) but the numbers do not match the plans.  The laser cutting is so precise they only fit one way.

Frank

ps: I had to line them up that way to join them because the steel ruler had to be on the bottom of each piece.  Otherwise I could not have fit all the pieces on the board in one sitting..

That looks imposing!  What is the model?

Bravo David.

This has only an 1100mm wingspan but there's so much bulk to it.

Looks like a fun kit to build.
Make sure you do not end up with 2 right sides as the picture indicates.

When I visited family in Holland in October 2023, I visited Ton van Munsteren.  He is a prolific designer and has many models published in British model magazines.  The best way to describe him is to call him Holland's Laddie Mikulasko*. 
Ton had just designed and built the Box Fly 20 and gave me a kit.  I had to cut the pieces to fit them into my suitcase.

The first step was to re-glue all the cut pieces.  I pinned one piece to the board and aligned the other half by using a steel edge to make it straight.

Will let them cure overnight before starting to assemble the plane.

Photos:
1) photo of my visit to Ton's house and shop.  The plane is in the foreground.
2) the kit as given to me
3) all the pieces were nicely laser cut.
4) the pieces I had cut apart were glued together.  Note the metal ruler used to make sure the pieces were straight.

Frank

* Laddie flies with the Burlington group and has many designs published in RCM magazine.  He designed the Force 1, Laker, Northstar and Easy 100 put out by Balsa USA.