Toronto Electric Model Aviation Club Forum

Toronto Electric Model Aviation Club (TEMAC) => General Discussion => Topic started by: Oscar on September 10, 2019, 02:44:43 pm

Title: SAFE Select R/X bug in some models
Post by: Oscar on September 10, 2019, 02:44:43 pm
Few newer HH models who comes with SAFE SELECT R/X has a bug. 

For example the V900 or the Cherokee - those who bought the BNF and using SAFE SELECT enable (While in bind mode, you remove the bind plug before you bind your radio) did not notice the issue, but for those who bind with AS3X only (you leave the bind plug on while binding with your radio) , you will end up getting limited throw.

HH provides the workaround as follow - Bind with SAFE Select Activated.  Then you can assign SAFE Select to a switch and set the travel for that switch so you can't/never turn SAFE "on" if you prefer to not use it.

Or just purchase the PNP and put your own R/X.

HH is working to resolve to all models in the future.