Toronto Electric Model Aviation Club Forum

Toronto Electric Model Aviation Club (TEMAC) => General Discussion => Topic started by: Frank v B on June 27, 2020, 09:32:12 pm

Title: Flying tomorrow, Sunday June 28 10am-1pm
Post by: Frank v B on June 27, 2020, 09:32:12 pm
I will be there tomorrow if anybody needs help or wants to maiden an airplane.

Frank
Title: Re: Flying tomorrow, Sunday June 28 10am-1pm
Post by: Andy Hoffer on June 27, 2020, 10:06:20 pm
I will be there tomorrow if anybody needs help or wants to maiden an airplane.

Frank

@Frank v B can also offer his considerable expertise in planting balsa seedlings.   8)

Andy
Title: Re: Flying tomorrow, Sunday June 28 10am-1pm
Post by: Frank v B on June 27, 2020, 10:46:48 pm
Andy,

At least I am good at something.  ;)

F.



Title: Re: Flying tomorrow, Sunday June 28 10am-1pm
Post by: Andy Hoffer on June 28, 2020, 01:37:52 am
Andy,

At east I am good at something.  ;)

F.

hi @Frank v B .

Yes indeed.  That is where you do most of your planting!  (Good luck in your pursuit of excellence to the north, south and west!!)  :D

Andy
Title: Re: Flying tomorrow, Sunday June 28 10am-1pm
Post by: Frank v B on June 28, 2020, 04:04:35 pm
What a glorious day.... but windy from about every direction.  Jim, Alan, Athol, Simon Chapman, Mark, Michael and I had some great flights.

Congrats to Mark.  His first kit built airplane maidened just fine.  A few adjustments and a small CG shift and it should be a piece of cake to fly.  The main lesson he learned today was....never follow the "throws" advice on an instruction booklet.  Cut it back by at least 20% and it will still be 20% too much.

Frank