• November 26, 2022, 09:57:26 AM
• Welcome, Guest. Please login or register.
Did you miss your activation email?

!!

TEMAC Forum Guests

Please take the time to Register for the forum, especially if you are a TEMAC club member.

This is one of the most active RC club forums in Ontario. Please participate in the discussion to help our great club to continue to grow.

Author Topic: Finding M2.5x16 screws for Apprentice tail  (Read 187 times)

0 Members and 1 Guest are viewing this topic.

Offline Proteus

  • Trainee
  • *
  • Posts: 8
  • Karma: +0/-0
Finding M2.5x16 screws for Apprentice tail
« on: June 05, 2022, 08:04:15 AM »
Is there a place where I could buy M2.5x16 screws to reattach an Apprentice tail? 

The replacement didn't include these and our originals had been stripped.

Horizon Hobby sells hardware kits for other planes but not the Apprentice.  The heads on Amazon screws I bought were too wide to fit in the fuselage holes.

Thanks,

Daniel



Offline GordPayne

  • Airman
  • **
  • Posts: 23
  • Karma: +0/-0
    • Gord Payne - Arduino Projects
  • Real Name: Gord Payne
  • Started Flying RC: 1988
Re: Finding M2.5x16 screws for Apprentice tail
« Reply #1 on: June 05, 2022, 08:34:25 AM »
Hi there.

Look up Bolts Plus.

They have locations all over including Newmarket and Markham and North York. Give them a call.
Old Buttonville proverb,"If you have to hit the fence, hit the far fence, not the near fence."

Offline davidk

  • Ace
  • *****
  • Posts: 826
  • Karma: +6/-1
  • Real Name: David Kates
  • TEMAC #: 351
  • Started Flying RC: 2019
Re: Finding M2.5x16 screws for Apprentice tail
« Reply #2 on: June 05, 2022, 11:15:17 AM »
You need 2?  I'll leave them at the field today... under the lost and found table (where "somebody" left a damaged 6S battery... take them home boys).

I got mine from HobbyKing.  Sometimes Amazon has them.
« Last Edit: June 05, 2022, 11:18:49 AM by davidk »