Section A, steps 1 through 9 completed, the tail section is ready for covering.
The wing construction starts soon, but first I need to enlarge the holes in the ribs to fit servo leads and extensions.
@Michael I agree that a 25 or 30 size motor might be adequate on 3 cells.

Good luck at the swap!

Great pictures.

I am going to have to agree with you, David. I've had the same issue with other airplanes at the quick connect points. It's wise during maintenance to check and do a quick wiggle if you suspect there is an issue. Sorry about the loss of the airplane, but great explanation and research.

20

25

35

65

$40.00
Guy

$30.00
Guy