How do I wire in a BEC, if all the channels on my receiver are taken?

[Eric Adventurer]

How do I wire in a BEC, if all the channels on my receiver are taken?

Thanks guys,

Eric

[pmackenzie]

Y connector.

Pat MacKenzie

[piker]

I assume you could also use the binding port, but you'd have to move some plugs around when you need to bind.

[Eric Adventurer]

Thanks Pat and Rob, I just realized that I already had the throttle plugged in to the throttle port the BEC is plugged in to my Bind port.
I mixed myself up because the sticker on the receiver is not well being aligned with the pins.