I'm plnning to be at TEMAC tommorrow (Saturday) from about 10:30 a.m. Anyone want to join me?
Gordon Braun-Woodbury
"How on earth do I land this thing?"
Adam and I will be there about 2pm.
Adam may be maidening his 2-meter pattern plane.
Maybe Sunday depending on the wind;
Monday looks like it should be good too.
Michael
I wish I could, but I'll be in Kingston.
Are Wednesday evenings becoming regular yet?
Robert
Hi ! Gordon, I will be there with my super cub.
See U at field.
I'm not aware of Wednesday evening flying yet; last week it rained.
Maybe this week if the weather is decent.
Michael
The new safety fence is up, and a wonderful fence it is too! Thanks to John K, Keith M, Nestor, and especially Bill whose skills as a fencemeister are non pareil!
Gordon Braun-Woodbury
"How on earth do I land this thing?"
Adam and I flew at TEMAC today.
The new fence is really nice, and the field is in fact a little smoother.
The driveway was much better too.
High winds are predicted for Sunday; Adam and I will probably go Monday morning.
Michael
How did Adam's new pattern ship fly?
Pat MacKenzie
Adam's model flew as follows:
There was a terrible motor noise, which was later adjusted through the speed control. Now the motor is quieter and much stronger. I guess it wasn't set up properly.
One landing gear leg broke; it was badly repaired by the person who sold it to Adam. Now repaired better, I hope.
As far as the flying went, it was great. The flight was short because Adam landed early to figure out what was wrong with the motor, but it was able to fly straight up, and it flew straight as an arrow.
Weather permitting, Adam will give it another go Monday morning.
Check out the improvements at TEMAC:
http://www.temac.ca/news.html
Michael
quote:
Originally posted by Michael
Adam's model flew as follows:
There was a terrible motor noise, which was later adjusted through the speed control. Now the motor is quieter and much stronger. I guess it wasn't set up properly.
One landing gear leg broke; it was badly repaired by the person who sold it to Adam. Now repaired better, I hope.
As far as the flying went, it was great. The flight was short because Adam landed early to figure out what was wrong with the motor, but it was able to fly straight up, and it flew straight as an arrow.
Weather permitting, Adam will give it another go Monday morning.
Check out the improvements at TEMAC:
http://www.temac.ca/news.html
Michael
The Schulze ESC wasn't set properly, the timing was set to "very soft" where it should have been set to "very hard". The motor is a Plettenberg 30-15 outrunner, and the ESC was set to a geared Hacker. The change in timing solved the issue.
A few photos posted.
http://www.temac.ca/news.html
Send me your images and I'll post them too.
[email protected]Michael
Fantastic job on the fence, guys. I haven't seen it in person yet, but it looks great in the photos. Thanks for all your hard work.
Robert
quote:
Originally posted by byrocat
-- DARN! Just realized that I'd just over-written the settings for the Explorer 40 with the ones for the Arrow pusher.
OK I will bite. You talking about the Avro Arrow by MadRob or your own design?