Toronto Electric Model Aviation Club Forum

Toronto Electric Model Aviation Club (TEMAC) => General Discussion => Topic started by: Gregor77 on January 17, 2011, 11:26:57 PM

Title: Evelon
Post by: Gregor77 on January 17, 2011, 11:26:57 PM
Does anyone know how to set up everlon mixing on a DX5e?



Fight on and fly on to the last drop of blood and the last drop of fuel, to the last beat of the heart.

— Baron Manfred von Richthofen.

Title: Evelon
Post by: pmackenzie on January 18, 2011, 03:05:36 AM
Don't have a DX5, but they show how on page 11 of the manual

http://www.spektrumrc.com/ProdInfo/Files/DX5eUserGuide.pdf

Mix switch "up", left elevon on the aileron port, right elevon in the elevator port.

If by messing with the reversing switched you still can't get things to go the right way try swapping the two servo connectors.

Pat MacKenzie
Title: Evelon
Post by: Gregor77 on January 19, 2011, 12:22:18 PM
It, worked!  Very cool!   My SU47 is all good now... Is there anything that I have to watch out for?  Apparently the plane is not that fast and I have heard it floats OK. 55mm fans. I made sure that the rear elevator and the ailerons are level.  They seem to move OK with no binding.



Fight on and fly on to the last drop of blood and the last drop of fuel, to the last beat of the heart.

— Baron Manfred von Richthofen.