OK, so the float bug has bitten!
I have some GWS floats, and am going to find a suitable airplane to mount them on. But they come with no rudder. To the experienced float fliers out there.....
How to you control a plane, in the water, if there is no water rudder?
Is there a really simple way to add a water rudder?
Thanks,
Simon
My guess is that you could extend something from the rudder down into the water. Sort of like a tail gear assembly, just longer and with a blade on it instead of a wheel.
or get a twin, and setup some thrust differential and mix it into the rudder channel.
Most light planes don't need a water rudder, the air rudder redirects the prop wash and that's enough. My 4S SuperCub doesn't have a water rudder and it's fine. Plus, the weeds at Frenchman's Bay are super thick and you'll wind up snagging them with a water rudder.
Ben
However, a fire suppression system is a must? ;D
All of the sugestions above are valid :)
However, I agree with Ben. Keep it simple and don't worry about a floatr rudder for now. The smaller, lighter planes (the type that would use GWS floats) can usually get away with no rudder. You can add one later is you feel it's necessary.
I haven't owned a ton of planes with floats (maybe 5 or 6) but of the planes I have, the Decathalon is the first with a rudder. I've been flying the Cub for years with no water rudder.
Robert
Quote from: thehaze on August 19, 2012, 10:50:45 PM
However, a fire suppression system is a must? ;D
Har har. Yes, the fire suppression system is called "the lake"; ask Rob.
Ben