Can anyone tell me if HS-225MG Hitec Servos will work on a 64" 3D plane 5-6lbs (http://www.extremeflightrc.com/html/64MXS.html (http://www.extremeflightrc.com/html/64MXS.html)) ?
The spec calls for Hitec 5245MG or 7245 but the combo I was looking at has the 225MG
From the spec - they look reasonable but rcgroups the comments are similar to this one: "hs-225mg, definitely will get some blowback, they will work fine for most though."
Will these work for an average pilot starting a bit of 3D and more aerobatics? (The servos are already installed and it will end up quite expensive to replace them with better ones).
http://hitecrcd.com/products/servos/micro-and-mini-servos/analog-micro-and-mini-servos/hs-225mg-metal-gear-mighty-mini-servo/product (http://hitecrcd.com/products/servos/micro-and-mini-servos/analog-micro-and-mini-servos/hs-225mg-metal-gear-mighty-mini-servo/product)
http://hitecrcd.com/products/servos/sport-servos/digital-sport-servos/hs-5645mg-high-torque-metal-gear-servo/product (http://hitecrcd.com/products/servos/sport-servos/digital-sport-servos/hs-5645mg-high-torque-metal-gear-servo/product)
http://www.extremeflightrc.com/html/64MXS.html (http://www.extremeflightrc.com/html/64MXS.html)
Thank you
The SU29 has 5245MG on all surfaces. They have been perfect and I would use them again. They are set up with huge deflection yet have a precision I've never had in a plane before. I'm running them at 6Volts and initially I struggled to fly them they were so fast even around center. I added more expo and that brought them into control for me.
I know you were asking about an alternate servo I just figured I would give my opinion on the recommended one. I looked at the specs and besides not being digital I suspect they will be fine.
http://hitecrcd.com/products/servos/micro-and-mini-servos/digital-micro-and-mini-servos/hs-5245mg-mini-metal-gear-servo/product (http://hitecrcd.com/products/servos/micro-and-mini-servos/digital-micro-and-mini-servos/hs-5245mg-mini-metal-gear-servo/product)
Thank you Ed - The 5245MG's are the recommended ones but unfortunately the plane I was considering was not and replacing them will not make sense at this point ..:(