Text only | Text with Images

Toronto Electric Model Aviation Club Forum

Toronto Electric Model Aviation Club (TEMAC) => General Discussion => Topic started by: fearless on August 30, 2014, 01:52:14 AM

Title: Need help with retracts and flaps not working.NEVER MIND GUYS GOT IT FIGURED OUT
Post by: fearless on August 30, 2014, 01:52:14 AM
So I'm stunned for the past 4 hrs trying to figure this out.
This is for my Jet it has 2 ali 2 flap 2 elevator which I set already.
I know for retracts it goes into AUX 3 set for GEAR doesn't seem to work but I know it works cause when I put it on the rudder slot to test it, it works fine.
flap I put into AUX 2 switch is flap that does work everytime I flip the switch it moves my elevator abit.
I'm going to be at the field tmr hopefully someone can help me out!
DX8 by the way.

THANKS
Title: Re: Need help with retracts and flaps not working.
Post by: sihinch on August 30, 2014, 08:52:15 AM
Check the limits for the retract channel are set to -100% and +100%
Title: Re: Need help with retracts and flaps not working.
Post by: fearless on August 30, 2014, 02:21:49 PM
I tired but seems to me its only on the differential.
This Jets comes with an electronic board where everything attaches on to it and then to the servo's jr leads.
Title: Re: Need help with retracts and flaps not working.NEVER MIND GUYS GOT IT FIGURED OUT
Post by: gmcnic on September 01, 2014, 06:37:06 AM
Nice flying, Chi.
Here's a video of your TAFT Viper flight yesterday.

http://youtu.be/ZNfN2iY4fKs (http://youtu.be/ZNfN2iY4fKs)
Title: Re: Need help with retracts and flaps not working.NEVER MIND GUYS GOT IT FIGURED OUT
Post by: Oscar on September 01, 2014, 07:58:48 AM
Great flight Chi.   :D
Text only | Text with Images