Covering options?

[Gregor77]

I have a very old Top flight kit that was painted over the wood?   What are my options here as it appears that the plane was not even sanded properly and looks terrible.  I really need to just finish the wing.  I would like a durable matt finish. 

[bfeist]

I'd suggest sanding down the painted wood and covering in thin (1/2oz ) cloth and water based polyurethane. Smooth, light and durable.

[Gregor77]

I am not familiar with that process.

[bfeist]

Attached is a photo of the stuff. You can get it at Home Depot.

Here's a link with instructions:
http://pldaniels.com/flying/balsa/fiberglassing-model-aircraft-with-water-based-polyurethane.html

It's way less stressful than using epoxy. I covered my nooner this way if you want to have a look at the final product.