Vintage Cloud Break

[GeoffM]

Selling a vintage Cloud Break Tail Dragger. 60" wing span and in great shape for its age.

Comes with Servo for the ailerons.  You need a servo for the rudder and elevator, motor, esc, rx, battery.

It's about 3.75lbs all up.  I was going to run it on a Power 10 1000kv 375 watt motor and 50 amp esc.

You will see a motor on it.  It does not work.  I only used it to mock up the motor mount...the mount will come wit the plane but the motor will not.

Plane was built from original plans ordered back in the 70s.

$25 and it's yours.

[Gregor77]

This has Frank all over it! 

[Frank v B]

It is a Cloud Dancer 40 and is a very flyable airplane.  It is .46 size.  It would taxi beautifully on a Power 10.   
It was designed by Fred Reese and published in RCM magazine in 1995.
If nobody wants it, I will take it for $25.00...just to keep Cadez happy.

Frank

[GeoffM]

You are right...Cloud Dancer.  It has the original plans ordered from the designer.  Total vintage.  It's yours Frank...let me know if you want to meet at the field or John's Hobbies.  I may and try to get to the field on Thurs morning between 7:30 and 9:00am.

[Frank v B]

We met yesterday and swapped prisoners (a plane for $20). 

Frank

https://www.youtube.com/watch?v=DvVl_-DGTHM