Warwing inspired Space Shuttle

[sihinch]

I used a Turnigy D3548 790kV motor on 4S with a 12x6 prop. I checked the stats and it should have been fine. So maybe I got a bad motor or had too little cooling.

As luck would have it, I have an old D3548 exactly the same, so will work on putting that in and adding some cooling. I may then go 3S and put a 14" or 15" prop on. That should also be fine.

So she may be back in the air sooner than expected. Just need to work out how to get to the ESC!!!! I will take Bruce's advice and cut a hole in the bottom.

[sihinch]

Great flight yesterday for Endeavour after a few little tweaks. The main thing was the adjustment to the rudder - flies straight and level with about 1" right rudder! 

[msatin]

Fantastic Simon - congratulations on your flight!

[bfeist]

This project is NASA approved

[sihinch]

That's both funny and means a lot!

You were the inspiration for this build Ben!