Trainer 40

Started by GuyOReilly, April 27, 2024, 02:38:00 PM

Previous topic - Next topic

0 Members and 3 Guests are viewing this topic.

GuyOReilly

Motor mount installation problem solved.
Added 1/2 inch dowels, drilled in the centre with drill press to fit the long screws.
Happy with the results.


Andy Hoffer

Very nicely done Guy! 

Andy

GuyOReilly

Well, the Maiden Flight did not go as planned.
After a very smooth takeoff and left hand turn, a bit of up elevator trim, left turn toward to runway and then total loss of control.
The plans went nose first down in the field 50-75 feet north from the runway threshold.
The most probable cause was a short in the ESC, see the pictures.
The receiver was broken during the crash.

Image #31 you can see the burnt hole.
Image 32 shows that it was a 60 amps ESC; the moter did not draw more than 40 with a 12X5 prop as per manufacturer instructions.
Images 33 and 34 the remains,

A funeral will be held next week.

Frank v B

"Never trade luck for skill"