BNIB Phoenix Extra 300S GP/EP **SOLD**

[ppalumbo]

BNIB Phoenix Model Extra 300S GP/EP ARF 57" Wingspan  $160

FEATURES
Construction: Balsa and plywood
Wings: One-piece
Covering: Adhesive backed factory applied, color scheme is Red with
a thick White stripe on the wing and fuselage
Radio Compartment: Plywood reinforced
Cowling: Pre-painted fiberglass
Canopy: Clear, single with painted pilot figure
Wheel Pants: Pre-painted fiberglass
Landing Gear: Pre-formed aluminum, 0.12" (3.5mm) thick, 0.078" (2mm)
diameter tailgear, 2.25" (57mm) main wheels, 1" (25mm) tailwheel
Aileron Control: Dual servo
Building Time: Ready to fly in several hours

INCLUDES
Pre-built and covered wings, fuselage and tail assemblies, pushrods,
pre-bent main landing gear, tailwheel wire, 2.25" (57mm) main
wheels, 1" (25mm) tailwheel, nylon engine mount, fuel tank, wood
servo trays, 2.25" (57mm) spinner, wing joiner, 6.5" x 10"
(165mm x 250mm) foam padding, pilot figure, decals, hardware

REQUIREMENTS
For glow operation;
Engine: .46 cu in (7.5 cc) 2-stroke
OR .53 cu in (8.7cc) 4-stroke
Muffler: Standard type included with engine
Servos: Five, 42 oz/in torque minimum
(2-ailerons, 1-elevator, 1-rudder, 1-throttle)
Propeller: 11x6

For electric operation;
Brushless Motor: Great Planes Rimfire .46 42-60-800, GPMG4725
ESC: 60A
Propeller: 12x8, or 13x6.5
LiPo Battery 4S (14.8V) 30C, at least 4000mAh
LiPo battery charger and balancer
Servos: Four, 42 oz/in torque minimum
(2-ailerons, 1-elevator, 1-rudder)

For glow and electric power;
Radio: 4-channel
Servo Extension 6": Two, for aileron servos
Y-Harness: One, for aileron servos
Misc. Items: Glow plug, glue, medium fuel tubing, fuel filter,
propeller, building and field equipment

SPECIFICATIONS
Wingspan: 56.75" (1441mm)
Weight: 6 lbs (2760g) approximate
Length: 50.3 " (1280mm)
Specs such as Wing Area and Wing Loading are not provided by the
manufacturer
Airfoil: Fully-symmetrical, low-wing
Center of Gravity: 3.5" (90mm) Back from the wing's leading edge
at the fuselage
Control Throws-
Elevator: Up & Down 0.43" (11mm)
Rudder: Right to Left 0.79" (20mm)
Ailerons: Up & Down 0.31" (8mm)