WTB...EDFs for e-Flite Airliner

[Wingnutz]

Need 2x 64mm EDF motor/fan/shroud unit
Originally had e-Flite BL 400 3500kv motor but these are out of production (Pinnacle has one but it's ouch expensive and just the motor) .I have no idea what the fan units/impellers were, except they were 65mm
If you wanna sell a pair of something close, LMK.

[Frank v B]

Mr Nutz,


I have found the following:
- a 65mm fan with an e-flite 480 outrunner DF motor 4800 kv installed (used)
- a Turnigy P26 DF motor P2627L-4200 never run still in the box
- a 65 mm fan housing and blade- never used
- another 65 mm fan housing with impeller.


note: none of the 65mm fans are identical but if you find another one, one of these may match.


Bill, if any of these can be of use to you, let me know.  The price is the same as I paid for them (zero dollars, zero cents).


Also, I saw one of the E-Flite EDF motors at John's Hobbies and it has been there for a while.  I can check and see if he is willing to part with it for a discount.  John's Hobbies has been kind to TEMAC members in the past by discounting stock that has been sitting there for a while.  Let me know.


Frank

[Skyking]

Hi Bill,
I have a pair. Never used. Reasonable.
Ken

[Wingnutz]

Hi Ken,
Knowing your sense of humour, I can only speculate as to the exact meaning of "pair" in your post. Can you specify?
Mr. Nutz

[Skyking]

Gosh Bill!
I never thought of it being interpreted that way.
No these came out of a foam Tomcat that I was going to put a rocket motor in. Never used and you can have the speed controls also. I work today until 10 PM but its easy to arrange to see them on the weekend.


Kind regards, Ken

[Wingnutz]

Innocence you are not ...good sense of humour you have!
Are you flying at all this weekend or is there a better way to see the pair?
Before I get too excited, are they 64mm and do you know the kv rating?

[Wingnutz]

Ken, LMK what time and where I can have a look at/buy the EDFs.