SIG Komander

[GuyOReilly]

Hello, I am starting to build a SIG Komander.  I plan on installing a E-Flite 46 Outrunner motor, using 3300-4S battery. 
I am looking for a template for the X-mount for the motor so I can drill and add the blind nuts without drilling through a motor mount.
The dimensions I came up with were 50mm centre to centre as per the attached picture.

Are these the correct dimensions for the E-Flite?

Thank you.
Guy O'Reilly

[Frank v B]

Guy,

Just pulled out my NIB E-Flite Power 46, the original instructions and my digital micrometer.*
Funny that the instructions do not contain the drawings and distances.

Distance between the firewall mounting holes centres- 56.0 mm  (outer holes) Measured diagonally across the centre.
Distance between the motor mounting hole centres- 30.0 mm (inner holes).  Measured diagonally across the centre.

The inner holes are symmetrical for the Power 46.  Some motors are not.

Hope that helps.

Frank

* Bruce will be proud of me!

[GuyOReilly]

Thank you Frank!
This helps.
I too was surprised  to see that there were no template or dimensions shown in the instructions.
Guy

[Herman8r]

Guy 

I am very interested in finding out how you liked the Sig Komander as an electric?

I am planning to do the same.

Did you have a kit? or did you build it from scratch?