Dry fitting the ribs.
The quality of this kit is impressive.
The spars and leading and the trailing edges are notched for a tight fit.
Only complaint so far is the inconsistent balsa density ranging from ultra light and flimsy (the trailing edge spar) to super hard and heavy (one sire of the elevator).
Enjoying the build process.

$40

$30

$80

A collection of large props.  16 in total, new in package, never used.  One is an APC branded (15"x8") the rest are knock-offs.

13" diameter
- three at 6.5" pitch

14" diameter
- six at 7" pitch.

15" diameter
- five at 8" pitch

17" diameter
- two at 8" pitch

Starting bid is $10 (mine).  Minimum increase $1.00.  Winner is highest bid before 8 pm Wednesday, May 1

Thanks for looking and even more if you bid on it.

Frank

OBSERVATIONS: Interesting. 
- half the size of last year...if that is possible.
- most stuff for sale was the nice attitude:  "If it sits in my basement it is worth nothing.  If I sell it for $5.00 I have money for 3 coffees next week".
- half the tables were priced "anything more than zero gets it out of my house".  Normally only 1/4 of the tables have this attitude.
- Old but flyable IC motors were not selling at $5.00! (OS FP40 with muffler).  Most of us started with that $100 motor on our first trainers 30 plus years ago.

Went and left happy with $300 retail new stuff for $25.00
- 4 new Graupner nylon power props (10" diameter)- $2.00 total!
- 4 sealed rolls of covering- $10...total!
- brand new Castle Creations 45 amp ESC, never used but no package- $5.00  (retail; $85 plus tax)
- Phasor inrunner BL motor in good shape 350 watts- $5.00- retail was over $80 when it came out.

Frank

Turbotimber plus warwing.
Plus 13 roaringtop 35c lipo's and 5 Admiral 2200-2500 4 cells. I'd like to sell as a package. Batteries are in good shape.The batteries are at my condo in Richmond Hill. The planes are in a storage locker but I will bring them to my condo for viewing.Best offer.

Section A, steps 1 through 9 completed, the tail section is ready for covering.
The wing construction starts soon, but first I need to enlarge the holes in the ribs to fit servo leads and extensions.
@Michael I agree that a 25 or 30 size motor might be adequate on 3 cells.

Good luck at the swap!

Great pictures.