Ok so I need to raise some funds so despite the fact that I'd like to keep ALL of the following, they go on sale now. :(
BRAND NEW: (MOUNTED BUT NEVER EVEN TEST RUN)
2 - NTM Prop Drive 35-48 Series 900KV (Up to 4S - 800 watt) outrunners. Bought for my Solent but just discovered that they are the wrong KV for that project. Paid $36 in hand each ... selling for $20 each. BTW, you also get the back mounts which I had to buy separately. No pic available of them by themselves cause they're currently mounted on the Solent's wing. :) (see pic) However you can see them closeup and read about them at http://hobbyking.com/hobbyking/store/__16231__ntm_prop_drive_35_48_series_900kv_815w.html
----------------------------------------------------------------------------------------------------------------
LIGHTLY USED, EXCELLENT CONDITION: 7 FLIGHTS
1 - Turnigy Aerodrive SK3 3530-1460Kv Outrunner (Up to 3S - 430watt) This is the equivalent to the AXi 2814/10. Paid $40 in hand ... selling for $20.
--------------------------------------------------------------------------------------------------------------------
VERY LIGHTLY USED, EXCELLENT CONDITION: 4 FLIGHTS
1 - Turnigy TR 35-36C 1100kv Outrunner (Up to 3S - 400w)
Paid $37 in hand ... selling for $20
--------------------------------------------------------------------------------------------------------------------------
BRAND NEW:
5 - Turnigy G10 - 810kv outrunners (Up to 4S - 375watt) Paid $40 each in hand ... selling for $25 each
--------------------------------------------------------------------------------------------------------------------------
USED (12 FLIGHTS) BUT IN GOOD CONDITION:
1 - Turnigy 50-65-380Kv (Up to 8S - 1800watt) outrunner. Paid $60 in hand ... selling for $35
-------------------------------------------------------------------------------------------------------------------------
BRAND NEW:
Quantum Pocket Vibration Voltage Meter With Alarm. Paid $32 in hand ... selling for $20
Colin
Colin,
Please set aside one of the G10's for me.
Thanks,
Mike
Can I take the 8S 5065 motor please?
No problem Mike. Simon, that one is sold ... pending funds. Happened within 15 mins of posting this morning of RCC. Didn't have time to update status til now.
So updated status:
One Turnigy G10 - 810kv outrunner sold ... pending funds to our own Mike H. Four still available.
Turnigy 50-65-380Kv sold ... pending funds.
Colin
I'll take the two 35-48's
Jack.
Hi Colin
I'll take a G10 if any are left
Ok updated status:
TWO Turnigy G10 - 810kv outrunners sold ... pending funds ... to Mike H and BJ. Three still available.
Turnigy 50-65-380Kv sold ... pending funds.
Both NTM Prop Drive 35-48 Series outrunners sold to Jack ... pending funds.
So, the following are still available:
LIGHTLY USED, EXCELLENT CONDITION: 7 FLIGHTS
1 - Turnigy Aerodrive SK3 3530-1460Kv Outrunner (Up to 3S - 430watt) This is the equivalent to the AXi 2814/10. Paid $40 in hand ... selling for $20.
--------------------------------------------------------------------------------------------------------------------
VERY LIGHTLY USED, EXCELLENT CONDITION: 4 FLIGHTS
1 - Turnigy TR 35-36C 1100kv Outrunner (Up to 3S - 400w)
Paid $37 in hand ... selling for $20
--------------------------------------------------------------------------------------------------------------------------
BRAND NEW:
3 remaining - Turnigy G10 - 810kv outrunners (Up to 4S - 375watt) Paid $40 each in hand ... selling for $25 each
--------------------------------------------------------------------------------------------------------------------------
BRAND NEW:
Quantum Pocket Vibration Voltage Meter With Alarm. Paid $32 in hand ... selling for $20
Colin
Quote from: sihinch on September 03, 2015, 11:08:26 AM
Can I take the 8S 5065 motor please?
Hey Simon, do you still want this? The guy over at RC Canada was a no show for pickup ...
Colin
Yes pls. You want EMT?
sure :)
Hey Colin
Is the VERY LIGHTLY USED, EXCELLENT CONDITION: 4 FLIGHTS
1 - Turnigy TR 35-36C 1100kv Outrunner (Up to 3S - 400w)
Still available???
If so I'll take this one as well.
PLS.
BJ
Updated status:
TWO Turnigy G10 - 810kv outrunners sold ... pending funds ... to Mike H and BJ.
Turnigy 50-65-380Kv sold to Simon.
Both NTM Prop Drive 35-48 Series outrunners sold to Jack.
Turnigy TR 35-36C 1100kv Outrunner sold ... pending funds ... to BJ
So, the following are still available:
LIGHTLY USED, EXCELLENT CONDITION: 7 FLIGHTS
1 - Turnigy Aerodrive SK3 3530-1460Kv Outrunner (Up to 3S - 430watt) This is the equivalent to the AXi 2814/10. Paid $40 in hand ... selling for $20.
--------------------------------------------------------------------------------------------------------------------
BRAND NEW:
3 remaining - Turnigy G10 - 810kv outrunners (Up to 4S - 375watt) Paid $40 each in hand ... selling for $25 each
-------------------------------------------------------------------------------------------------------------------------
BRAND NEW:
Quantum Pocket Vibration Voltage Meter With Alarm. Paid $32 in hand ... selling for $20
Colin
Ok guys, I'll be at the field probably by 4pm today (it's HOT!) so whoever wants to pickup their motors, I'll have them with me.
Colin
Ugghhh just missed you.
Should be out again on Monday
Hi Colin, I'll take one of the remaining G10's please :)
Imran
Quote from: imran13 on September 05, 2015, 10:47:51 PM
Hi Colin, I'll take one of the remaining G10's please :)
Imran
Cool ... I take EMT. :)
[email protected]Colin
Colin,
I will take whatever motors have not been sold as of today at the price you requested.
No need for the pocket vibrator. ;D
Frank
Ok Frank,
You've got the Turnigy Aerodrive SK3 3530-1460Kv Outrunner and EITHER 2 OR 3 of the Turnigy G10 - 810kv outrunners ... depending on if Imran responds to me within the next day or so ... never heard back from him after he asked for one of them. The Solent needs more stuff so the quicker I can wrap up these sales with cash in hand (or bank via EMT) the better.
Colin
Quote from: thehaze on September 05, 2015, 08:43:32 PM
Ugghhh just missed you.
Should be out again on Monday
Hey Mike, send me an EMT at
[email protected] ... this way if I see Greg at the field and not you I can just give it to him since it seems like I see him a lot more at the times that I go.
Colin
All motors sold ... Quantum Pocket Vibration Voltage Meter With Alarm still available.
Colin
Quantum Pocket Vibration Voltage Meter With Alarm sold to Ken pending funds.
Colin
Hi Colin,
I'll pick it up from you.
Sat OK?
I'll call you.
Yup should be around Sat
Hey Colin, will you be at the pilots meeting AGM for me to collect the 5065 motor?
Thanks
S
Nope ... but it's here safe and sound snug as a bug in it's baggie. :)
Colin