Fundraising sale :)

wollins · September 02, 2015, 11:20:00 PM

Ok so I need to raise some funds so despite the fact that I'd like to keep ALL of the following, they go on sale now.

BRAND NEW: (MOUNTED BUT NEVER EVEN TEST RUN)
2 - NTM Prop Drive 35-48 Series 900KV (Up to 4S - 800 watt) outrunners. Bought for my Solent but just discovered that they are the wrong KV for that project. Paid $36 in hand each ... selling for $20 each. BTW, you also get the back mounts which I had to buy separately. No pic available of them by themselves cause they're currently mounted on the Solent's wing.

(see pic) However you can see them closeup and read about them at http://hobbyking.com/hobbyking/store/__16231__ntm_prop_drive_35_48_series_900kv_815w.html

----------------------------------------------------------------------------------------------------------------

LIGHTLY USED, EXCELLENT CONDITION: 7 FLIGHTS
1 - Turnigy Aerodrive SK3 3530-1460Kv Outrunner (Up to 3S - 430watt) This is the equivalent to the AXi 2814/10. Paid $40 in hand ... selling for $20.

--------------------------------------------------------------------------------------------------------------------

VERY LIGHTLY USED, EXCELLENT CONDITION: 4 FLIGHTS
1 - Turnigy TR 35-36C 1100kv Outrunner (Up to 3S - 400w)
Paid $37 in hand ... selling for $20

--------------------------------------------------------------------------------------------------------------------------

BRAND NEW:
5 - Turnigy G10 - 810kv outrunners (Up to 4S - 375watt) Paid $40 each in hand ... selling for $25 each

--------------------------------------------------------------------------------------------------------------------------

USED (12 FLIGHTS) BUT IN GOOD CONDITION:
1 - Turnigy 50-65-380Kv (Up to 8S - 1800watt) outrunner. Paid $60 in hand ... selling for $35

-------------------------------------------------------------------------------------------------------------------------

BRAND NEW:
Quantum Pocket Vibration Voltage Meter With Alarm. Paid $32 in hand ... selling for $20

Colin

thehaze · September 03, 2015, 10:30:26 AM

Colin,

Please set aside one of the G10's for me.

Thanks,
Mike

sihinch · September 03, 2015, 11:08:26 AM

Can I take the 8S 5065 motor please?

wollins · September 03, 2015, 01:53:45 PM

No problem Mike. Simon, that one is sold ... pending funds. Happened within 15 mins of posting this morning of RCC. Didn't have time to update status til now.

So updated status:

One Turnigy G10 - 810kv outrunner sold ... pending funds to our own Mike H. Four still available.
Turnigy 50-65-380Kv sold ... pending funds.

Colin

Papa · September 03, 2015, 09:42:36 PM

I'll take the two 35-48's

Jack.

BJROB · September 04, 2015, 06:44:31 AM

Hi Colin
I'll take a G10 if any are left

wollins · September 04, 2015, 08:33:32 AM

Ok updated status:

TWO Turnigy G10 - 810kv outrunners sold ... pending funds ... to Mike H and BJ. Three still available.
Turnigy 50-65-380Kv sold ... pending funds.
Both NTM Prop Drive 35-48 Series outrunners sold to Jack ... pending funds.

So, the following are still available:

LIGHTLY USED, EXCELLENT CONDITION: 7 FLIGHTS
1 - Turnigy Aerodrive SK3 3530-1460Kv Outrunner (Up to 3S - 430watt) This is the equivalent to the AXi 2814/10. Paid $40 in hand ... selling for $20.

--------------------------------------------------------------------------------------------------------------------

VERY LIGHTLY USED, EXCELLENT CONDITION: 4 FLIGHTS
1 - Turnigy TR 35-36C 1100kv Outrunner (Up to 3S - 400w)
Paid $37 in hand ... selling for $20

--------------------------------------------------------------------------------------------------------------------------

BRAND NEW:
3 remaining - Turnigy G10 - 810kv outrunners (Up to 4S - 375watt) Paid $40 each in hand ... selling for $25 each

--------------------------------------------------------------------------------------------------------------------------
BRAND NEW:
Quantum Pocket Vibration Voltage Meter With Alarm. Paid $32 in hand ... selling for $20

Colin

wollins · September 04, 2015, 08:24:31 PM

Quote from: sihinch on September 03, 2015, 11:08:26 AM
Can I take the 8S 5065 motor please?

Hey Simon, do you still want this? The guy over at RC Canada was a no show for pickup ...

Colin

sihinch · September 04, 2015, 08:36:12 PM

Yes pls. You want EMT?

wollins · September 04, 2015, 08:38:17 PM

sure

BJROB · September 04, 2015, 10:44:44 PM

Hey Colin
Is the VERY LIGHTLY USED, EXCELLENT CONDITION: 4 FLIGHTS
1 - Turnigy TR 35-36C 1100kv Outrunner (Up to 3S - 400w)

Still available???
If so I'll take this one as well.
PLS.

BJ

wollins · September 04, 2015, 11:59:45 PM

Updated status:

TWO Turnigy G10 - 810kv outrunners sold ... pending funds ... to Mike H and BJ.
Turnigy 50-65-380Kv sold to Simon.
Both NTM Prop Drive 35-48 Series outrunners sold to Jack.
Turnigy TR 35-36C 1100kv Outrunner sold ... pending funds ... to BJ

So, the following are still available:

LIGHTLY USED, EXCELLENT CONDITION: 7 FLIGHTS
1 - Turnigy Aerodrive SK3 3530-1460Kv Outrunner (Up to 3S - 430watt) This is the equivalent to the AXi 2814/10. Paid $40 in hand ... selling for $20.

--------------------------------------------------------------------------------------------------------------------

BRAND NEW:
3 remaining - Turnigy G10 - 810kv outrunners (Up to 4S - 375watt) Paid $40 each in hand ... selling for $25 each

-------------------------------------------------------------------------------------------------------------------------
BRAND NEW:
Quantum Pocket Vibration Voltage Meter With Alarm. Paid $32 in hand ... selling for $20

Colin

wollins · September 05, 2015, 10:25:51 AM

Ok guys, I'll be at the field probably by 4pm today (it's HOT!) so whoever wants to pickup their motors, I'll have them with me.

Colin

thehaze · September 05, 2015, 08:43:32 PM

Ugghhh just missed you.

Should be out again on Monday

imran13 · September 05, 2015, 10:47:51 PM

Hi Colin, I'll take one of the remaining G10's please

Imran