Recent posts

#91
General Discussion / Re: Spitfire - Butterfly
Last post by Frank v B - June 08, 2025, 05:45:25 PM
Neat!

A Spitfire Ornithopter.  A Spitnithopter!
What a neat idea.

Safe home Jan.

Frank
#92
General Discussion / Spitfire - Butterfly
Last post by Jan - June 08, 2025, 01:24:27 PM
It was nice to see Spitfire - Butterfly Effect in Prague / Czechia.


https://youtu.be/Siem3th1DWE?si=0LavnqDWK3TU8E0b
#93
General Discussion / Re: New MAAC Zone Director is ...
Last post by Michael - June 07, 2025, 06:06:56 PM
Good guy; nice guy.
#94
General Discussion / New MAAC Zone Director is a fr...
Last post by Frank v B - June 07, 2025, 02:53:13 PM
It was just announced that Rudie Nagelmakers is our new MAAC Zone L Zone Director.  He is taking over from Temac member Adam Maas.
Rudie is president of the Beeton Flyers (Alliston, Ont).  He has attended our Temac end of August BBQ event the last two years and joined us for breakfast before the 905 swap meet in April.

Rudie lives in Schomberg, is retired from computer sales.  His daughter Lisa lives in Toronto near me and does call me the odd time for home emergencies.

Here is a photo of Rudie (r) talking to Mark Satin at our August 2023 BBQ.

Frank
#95
General Discussion / Re: flying at Rogo Friday, Jun...
Last post by msatin - June 06, 2025, 10:21:12 PM
Fun day today - great to see everyone.
1st time in a while seeing 5 planes in the air at the same time.
#96
Building / Construction / 25 amp ESC- fried today during...
Last post by Frank v B - June 06, 2025, 10:03:05 PM
Flew my Chica today and after about 6-8 circuits the motor cut out.  Would not re-start so it could not be a low battery.

Brought the plane in.

The ESC overheated and actually unsoldered the yellow lead to the motor.
I put in a new 40 amp ESC to replace the damaged 25 amp ESC.

I re-soldered the yellow wire and it worked fine again.  Put it back in my collection in the ESC 20-40 amp ESC box.

The green arrow in the photo points to the location of the solder joint on the ESC.

Lesson learned*.

Frank

* I have always flown this motor (have 4 of them: E-Flite Series 6 -28 mm inrunner 2700KV with a max continuous of 34 amps) on 3 cells with a 4.1x4.1 APC prop drawing 18 amps (Nooner pylon racer) but I now remember that it would draw 25 amps on a 5x5 and 28 amps with this 6x4 APC prop.  Doh!
#97
General Discussion / NICE DAY! Flying at Rogo- thi...
Last post by Frank v B - June 06, 2025, 09:33:08 PM
Hopefully the weather will hold out.  I am planning to be at Rogo to fly just after lunch this Sunday.  If anyone needs help maidening an airplane, re-trimming one or need a check flight, come and join us.

Will try to fly my large 12' power glider again for the second time with Glenn's help.  I need his dolly (a crate with wheels) in order to take off.  Also need Glenn's flying talents to bring it back in one piece.

Frank
#98
General Discussion / Re: flying at Rogo Friday, Jun...
Last post by Noah - June 06, 2025, 09:13:42 PM
hopefully remaindering f16 tomorrow. should be a good day
#99
General Discussion / flying at Rogo Friday, June 6
Last post by Frank v B - June 06, 2025, 08:34:27 PM
A nice warm day at Rogo Field....if you didn't mind the smoke from the forest fires in Northern Ontario and Manitoba.

I counted at least 13 people there.

A lot of flying, changing winds.  It changed several times with a usual switch to cross-winds.


Photo report:
74- Mark and his flying wing
76- Alex and his dog Jacks.
78- Michael and his Kadet Senior
80- Peter and his plane.
83- George and his jet.
85- Alex just before the launch.
87- Paul and his Timber before the splat landing that knocked out the landing gear.
89- Kenny applying suntan lotion.
91- George prepping his jet.
93- Loi prepping his jet.

Frank


#100
Building / Construction / Re: Patrol Boat with Helicopte...
Last post by GuyOReilly - June 06, 2025, 10:20:29 AM
Next are depth charges @Frank v B .
Just need to secure some potassium.

https://www.youtube.com/watch?v=L1QzkxlImHY&t=66s